Do-more T1H Series PLC Hardware User Manual, 1st Edition, Rev. C
1–14
Chapter 1: Getting Started
Step 5: Establish Communication
Now that the Do-more T1H Series PLC is powered up, you need to establish a
communications link between the PC and the PLC. The Do-more Designer software
provides a Link Wizard to assist you with configuring this new communications link. To
open the Link Wizard, select the New Link... button in the Links section of the Main Page’s
Launchpad as shown below.
The
Link
Wizard will first ask you to choose which
communications port you will be using.
In this example, we will be using a USB
connection. Select USB, click Next and
the wizard will automatically search for
available CPU’s on that port.
Choose the CPU that you are
programming and select Next. The
Do-more Designer software will create a
link to that controller.
The Link Wizard will now display the
saved settings for this link as seen on
following page.
