Do-more T1H Series PLC Hardware User Manual, 1st Edition, Rev. C
1–6
Chapter 1: Getting Started
Do-more Software System Requirements
The Do-more Designer Windows-based programming software works with Windows® XP
(Home or Professional, 32-bit), Vista (Home, Basic, Premium, 32 or 64-bit), Windows 7
(Home, Professional, Ultimate, 32 or 64-bit) or Windows 8 (Home, Professional, Enterprise
32 or 64-bit; Windows 8 RT edition is NOT supported).
Please check the following requirements when choosing your PC configuration:
•
Minimum PC to PLC Connectivity, at least one of the following:
-
USB Port: connects to the CPU with USB-A connector (USB-A to USB-B cable)
- RS-232 Serial Port: connects to the CPU with RJ-12 connector (RJ-12 to DB9 or RJ-12
to USB-B serial converter cable)
-
Ethernet Port: connects to the CPU (T1H-DM1E) with RJ-45 10Base-T or 100Base-T
(Cat5 Patch Cable)
•
Hard Disk: 100MB free disk space
• Video Display: 1024x768, 256 colors resolution (1280x720, true color recommended)
•
Windows XP, 32-bit:
- 800MHz, single core CPU (2GHz, multi-core or hyperthreaded recommended)
- 512MB RAM (2GB recommended)
•
Vista, Windows 7 or Windows 8, 32 or 64-bit:
- 1GHz, single core CPU (2GHz, multi-core recommended)
- 1GB RAM (3GB recommended)
NOTE:
The PC/Laptop/Ethernet Switch connector at the “opposite end” of the PLC connector will dictate what
kind of cable you will need.
