SIOL-EI8B-USER-M
30
Startup
Powered by
Version 1, May 2022
7.1.
Loading the EDS files
This section describes how to configure a module, using Productivity Suite from AutomationDirect.com.
The Stride Basic IO-Link Master can be used with EtherNet/IP scanners capable of Class 1 I/O
Messaging (Implicit). Below, we show how to quickly get started using any EtherNet/IP capable
Productivity PLC.
1.
Download the IO-Link Master EDS file from AutomationDirect.com
2.
Open Productivity Suite and start a new project, or open an existing project, and go to
Hardware
Config
.
Fig. 7-1: Open Hardware Config.
3.
Navigate to the
EtherNet/IP
tab and click
Import EDS File
. Note: If your EDS library already has the
SIOL-EI8B part available, you can skip steps 3 and 4.
Fig. 7-2: Hardware Config - Import EDS File.
