Automationdirect.com Stellar SR44, User Manual

Page: 202 / 238

Appendix A: Setup Examples
A.1.6 – Loading the Default Parameter Values with ‘Keypad Starting’ Option
1. With ‘Starter Disabled’ shown on the display, press the ENTER button.
2. With ‘Applications’ shown on the top line of the display, press the ENTER button again.
3. With ‘Settings’ on the top line of the display, press the
쑼
button until ‘Default (keypad)’ is
shown on the top line of the display.
4. Press the ENTER button, and the display will flash three times to indicate that the default
parameters (with keypad starting) have been loaded.
5. Press the # button twice to return to ‘Stopped and ready’.
Enter
#
Enter
1 2
3
4
5 5
#
There is no need to save the parameters, as they have automatically been saved when the system was
reset to default values.
This example assumes that the unit has been disabled (see section A.1.2).
SR44 Series Soft Starter User Manual
1st Ed, Rev B 07/31/2019
A–8