Automationdirect.com Stellar SR44, User Manual

Page: 201 / 238

A–7
A.1.5 – Permanently Saving Parameters Set by the User
Follow this procedure to save parameters set by the customer.
1. With ‘Starter Disabled’ shown on the display, press ENTER button.
2. With ‘Applications’ shown on the top line of the display, press
쑼
button until ‘Permanent Store’
is shown at top of display.
3. Press ENTER to select ‘Permanent Store’ menu.
4. With ‘Save Param’ shown at top of display, press ENTER to permanently save parameters. The
display will flash twice to indicate this has been done.
5. At any of the above stages, pressing # will return the user to the previous menu.
Enter
#
Enter
#
1
2
3 4
5
5
(press button multiple times, or hold to scroll)
This example assumes that the unit has been disabled (see section A.1.2).
Appendix A: Setup Examples
SR44 Series Soft Starter User Manual
1st Ed, Rev B 07/31/2019