MCS Manual Rev. 1.4
59
CS-IO-Panel (Breakout Board)
The CS-IO-Panel (#202 201 402) provides a user friendly way to connect the power, I/O and laser
supply of the compact sensor. The camera power supply includes a reverse voltage protection and
features a 2A (two ampere) micro-fuse.
Fuse Specification
Current
2A
Dimension
5 x 20mm
Characteristic
T
Operating Temperature
-50°C to +125°C
Mechanical Drawings
Don´t connect C5 cameras to the CS-IO-Panel. Wrong wiring can cause damage
to the camera.
Due to laser safety regulations, the power supply for the laser must be
provided by a separate power source if the laser protection class is greater
than 2M. On the other hand, lasers with a laser class up to 2M can be powered
by bridging the I/O panel connectors as shown in the drawing below.
3D Sensors with < = 2M Lasers*
3D Sensors with > = 3R Lasers
*except model C5-2040CS18-38-2X. This requires a different circuit via separate power supply cable.
Summary of Contents for MCS 1280 Series
