Automation Direct STRIDE SiteLink SE-SL3011, User Manual

Page: 60 / 123

STRIDE
®
SiteLink Series Industrial VPN Routers User Manual 1st Edition
2-30
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
Chapter 2: STRIDE SiteLink Platform
Disabling Two-factor Authentication
You can disable two-factor authentication by going to “Two-factor Authentication” under
“Login and security” on the “My Profile” page. After clicking DISABLE, an e-mail will be sent
to your email address where you can confirm or reject the disabling of two-factor authentication.
You can always re-enable two-factor authentication later with the same or a new device.
User Access Token
A unique security access token is stored and valid for 7 days when a user has successfully logged
in. A user is automatically logged in when returning to www.StrideSiteLink.com on the same
browser and with the same IP address within that 7-day window. If the IP address has changed
or the user uses a different browser, the user has to log in again.
The Access Token for a device you have previously used to access the SiteLink Platform may be
removed to prevent automatic login. Browse to the My Profile page:
Note that you cannot remove the access token for the device you are currently using to access
the SiteLink Platform.
Transfer a Device
NOTE: If a Datalogging or other subscription is assigned to a device, you will not be able to transfer that device
unless the destination company has a license for that subscription available.
A router is assigned to a single company. To assign a router to a different company, the router
may be reset to default and reconfigured, or, the Transfer device utility will change the company
assignment without changing any other configuration settings.
The Transfer Device utility is found on the Tools page on the Device menu.
The serial number and Device key for the router must be known. The Device Key is assigned
to the router while you are logged in to the company where the router currently resides.