background image

21-Button Vertical (Portrait) Keypad Bezel for 6-inch Panels
(cont’d)

3–10

Chapter 3: Accessories

3

®

EA1-TCL-M Hardware User Manual, 2nd Ed., 10/10

21-Button Keypad Bezel continued at top of next page.

C-more 6” Micro Graphic Panel

installed in a 21 button Keypad

bezel EA-MG6-BZ2P

21-Button Keypad Bezel Specifications

Part Number:

EA-MG6-BZ2P

General:

• Micro-Graphic

Panels Supported

EA1-S6ML, EA1-S6MLW, EA1-T6CL

• Connection

Connects with expansion connector on the rear of the 

C-more

6” Micro-Graphic panel.

• Power Consumption

None

• Keypad Button Life

Minimum of 500,000 cycles

• Enclosure Mounting

(8) mounting clips, EA-MG-BZ2-BRK, included.

Note: The 

C-more

6” Micro-Graphic panel is installed into the keypad bezel using the

(4) mounting clips, EA-MG-BZ2-BRK, that are supplied with the panel.

Environmental:

• Operating Temperature

0 to 50 °C (32 to 122 °F)

Maximum surrounding air temperature rating: 50 °C

• Storage Temperature

-20 to 60 °C (-4 to 140 °F)

• Humidity

5 to 95 % RH (non-condensing)

• Environmental air

For use in Pollution Degree 2 environment

• Vibration

IEC60068-2-6 (Test Fc), 5-9 Hz: 3.5 mm amplitude, 9-150 Hz: 1.0G, sweeping, at a rate of
1 octave/min. (±10%), 10 sweep cycles per axis on each of 3 mutually perpendicular axes 

• Shock

IEC60068-2-27 (Test Ea), 15 G peak, 11 ms duration, three shocks in each direction

per axis, on 3 mutually perpendicular axes (total of 18 shocks)

• Noise Immunity

NEMA ICS3-304

RFI, (145 MHz, 440 Mhz 10 W @ 10 cm)

Impulse 1000 V @ 1 µs pulse

• Enclosure

For use on a flat surface of Type 1, 4X enclosure (Indoor use only)

• Agency Approvals

CE (EN61131-2), UL508, CUL Canadian C22.2 No. 142-M95, UL File E157382

Physical:

• Dimensions

6.394” (W) x 10.000” (H) x 2.488” (D)

[162.4 mm x 254.0 mm x 63.2 mm]

• Weight

26.1 oz. [740 g]

Summary of Contents for C-more EA1-T4CL






















































































































































































Reviews: