The information contained in this document is the property of Automatic Systems and is confidential. The recipient shall refrain from using it for any purpose other than the use of the
products or the execution of the project to which it refers and from communicating it to third parties without prior written agreement of Automatic Systems. The document is subject to
change without notice.
Smart n' Slim MP-MT-EN
p
5/40
#Configurer M340-MT-FR-00#
2. CONNECTION
The monitoring panel is a control centre used to monitor up to 20 lanes connected to the network no
matter where they are located in the building. The panel has the following functionalities, among others:
automatic detection of lanes on the network, lane status visualization, operating mode configuration and
parameter configuration.
The interface is Web-based.
The monitoring panel is available in PC Server versions ("Tower" or "Rack"):
That version combines the centralized server and its supervision software, accessible with a simple web
browser (1) from anyone informatics terminal connected to the same network than the devices.
"Tower" version
"Rack" version
The
Server
version includes a centralized server and its supervision software, which are
accessible via a Web browser
(1)
from any computer
(2)
connected to the same network as the
lanes.
(1)
The server is accessible through max 2 external browsers (i.e. installed and operating within 2 PC connected to the
server) or max 1 internal browser (i.e. installed in the server itself which is then only connected to a screen and keypad).
(2)
The minimum PC configuration must include and support the installation of one of the following browsers:
Firefox ≥ v7
Chrome ≥ v11
Safari ≥ v5
Opera ≥ v11
Netscape ≥ v7
Internet Explorer ≥ v8
In case of display problem with Internet Explorer:
o
In Tools menu, deselect the option "Compatibility view".
o
In Tools menu\Compatibility View Settings, deselect the option "Display intranet sites in compatibility view".
o
Press F5 key to refresh web page.
