The information contained in this document is the property of Automatic Systems and is confidential. The recipient shall refrain from using it for any purpose other than the
use of the products or the execution of the project to which it refers, and from communicating it to third parties without Automatic Systems’ prior written agreement.
Document subject to change without notice.
First
Lane
-MT-EN
p.
34 / 48
When the equipment is powered up, the function pictograms flash red during start-up of the CPU.
This is followed by an initialization phase during which the pictograms turn blue and the obstacles move
into their end positions.
When the equipment is operational, the pictograms indicate the operating mode defined by the
direction of passage.
R
EMOVING THE TOP COVER
After powering up the equipment in accordance with Ch.0, remove the 4 washers holding the
profile on the upper railing. Place the cover in a safe location.
R
EMOVING THE KINEMATIC PANEL
Start by opening the extension covers (
Ch.7.2. ) and switching off the equipment (
Ch.0).
Then remove the two screws holding the panel on the base frame.
4x
2x
