1
WWW.AUTOLOC.COM
TECH SUPPORT: 503.693.1918
SHAVE DOOR HANDLE SYSTEMS
Mount your solenoid in a DRY location.
We recommend using the Autoloc Solenoid Relocation Kit
(AUTSVAEX) to mount the solenoid inside the vehicle.
Mount the relay in a dry location.
Only use a high-AMP approved relay.
(AUTRA1000)
Make sure the mounting bracket has a
good chassis ground.
For optimal performance make sure to leave slack in the
cable. Do not make the cable too tight!
Make sure to always protect your connections to the
battery, using the appropriate fuses or circuit breakers.
AUTSVPRO
Mount in Dry
Location
Install Circuit
Protection
Good Ground
Required
Use High
Amp Relay
Leave Slack
in Cable
Autoloc Shaved Door Kits set the standard for shaved doors done right,
and your kit will provide you with years of flawless operation, however
the kit must be installed properly. Follow the guidelines below and all
instructions on the following pages closely.
PART #
PROTECTION
AUTSL35
30 Amp Fuse
AUTSL50
40/50 Amp CB
AUTSL75/100 60/70 Amp CB
CB = Circuit Breaker
©2019 The Hoffman Group L. L. C. All rights reserved. AUTSVPRO Rev5 1 of 4 01/22/2019
The above instructions are for reference only. THG LLC is not responsible for any inaccuracies in the above instructions. THG LLC is also not responsible for any property damage or personal injuries resulting from the
above instructions. Installation by qualified automotive professionals is highly recommended.
