2
e)
When operating a power tool outdoors,use can extension cord suitable for outdoor use.
Use of a
cord suitable for outdoor use reduces the risk of electric shock.
f)
lf operating a power tool in a damp location is unavoidable,use a residual current device
(RCD)protected supply.
Use of an RCD reduces the risk of electric shock.
3)Personal safety
a)
Stay alert,watch what you are doing and use common sense when operating a power tool.Do
not use a power tool while you are tired or under the influence of drugs,alcohol or medication.
A
moment of inattention while opera-ting power tools may result in serious personal injury.
b)
Use personal protective equipment.
Always wear eye protection.Protective equipment such as
dust mask
，
non-skid safety shoes
，
hard hat,or hearing protection used for appropriate conditions will
reduce personal injuries.
c)
Prevent unintentional starting.Ensure the switch is in the off-position before connecting to
power source and/or battery pack,picking up or carrying the tooI.
Carrying power tools with your
finger on the switch or energising power tools that have the switch on nvites accidents.
d)
Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left
attached to a rotating part of the power tool may result in personal injury.
e)
Do not overreach.Keep proper footing and balance at all times.
This enables better control of
the power tool in unexpected situations.
f)
Dress properly.Do not wear loose clothing or jewellery.Keep your hair,clothing and gloves
away from moving parts.
Loose clothes Jewellery or long hair can be caught in moving parts.
g)
lf devices are provided for the connection of dust extraction and collection facilities,ensure
these are connected and properly used.
Use of dust collection can reduce dust-related hazards.
4)
Powertool use and care
a)
Do not force the power tool.Use the correct power tool for your application.
The correct power
tool will do the job better and safer at the rate for which it was designed.
b)
Do not use the power tool if the switch does not turn it on and off .
Any power tool that cannot
be controlled with the switch is dangerous and must be repaired.
c)
Disconnect the plug from the power source and/or the battery pack from the power tool
before making any adjustments,changing accessories,or storing power tools.
Such preventive
safety measures reduce the risk of starting the power tool accidentally.
d)
Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool.
Power tools are dangerous in the
hands of untrained users.
e)
Maintain power tools.Check for misalignment or binding of moving parts,breakage of parts
and any other condition that may affect the power tool's operation.If damaged,have the power
tool repaired before use.
Many accidents are caused by poorly maintained power tools.
f)
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g)
Use the power tool,accessories and tool bits etc,in accordance with these instructions,taking
into account the working conditions and the work to be performed.
Use of the power tool for
operations different from those intended could result in a hazardous situation.
5)
Service
a)
Have your power tool serviced by a qualified repair person using only identical replacement
parts.
This will ensure that the safety of the power tool is maintained.
Summary of Contents for DP150
Page 1: ...DUAL ACTION POLISHER Original Instructions DP150...
Page 9: ...8...
