Autodesk CP100, User Manual

Page: 57 / 80

Customizing the View
51
To operate the control surface:
h
Do any of the following:
•
Press a button to select the displayed option.
•
Turn a dial to increase or decrease the value of the displayed channel or parameter. Turn
clockwise to increase the value. Turn counter-clockwise to decrease it.
•
Use the Player controls to navigate the Storyboard.
•
Use the trackballs to modify the displayed parameter.
Customizing the View
Use the controls on the lower right of the control surface to change the view as you work on your
grades. For example, enable Half to view a half-resolution version of your shot in the Player.
You can select any of the following options.
Control Surface Description Hot Key or UI Option
GUI Toggles the full-screen Player. E
NTER
Geom UI Shows or hides a geometry for the current
secondary. Show button in
Secondaries menu
Matte Switches between secondary view and result view.
F11
and
F12
Split Switches on and off split view in the Player. When
you enable Split, you can press the PERFM button to
enable multi-view and view up to 16 shots, or press
the CUE button to switch between horizontal and
vertical split view. These buttons are located on the
upper right of the control surface.
F5
,
F3
, and
F4
Half Switches between the full-resolution and half-
resolution (proxy) version of your shot in the Player.
If you have not rendered a proxy, an X appears in the
Player.
F9
Zoom/Home Switches between the 1x and 2x zoom.
F10
Render Switches between a rendered version of your shot
and output view. If you have not rendered the shot,
an X appears in the Player.
P
Label Toggles the shot name text on the image.
W
PRIM Toggles the display of your shot. Displays your shot
as it appears after modifications are made from the
Grading or Curves menu, or as it currently appears
(with the entire colour grade applied). You can use
this option only after you have added secondaries. I
Result Displays the shot as it currently appears—with the
grade applied.
O