manualshive.com logo in svg

Autodesk AutoCAD Design Suite 2013, Installation Manual, Page: 92 / 138

Share
Download
Autodesk AutoCAD Design Suite 2013 Installation Manual Download Page 92

Linux hardware and software requirements for the network license server

Requirement

Hardware/Software

NOTE

The Network License Manager supports multiple network interface

cards, but at least one must be an Ethernet card.

TCP/IP

Communication protocol

NOTE

The Network License Manager uses TCP packet types

11.10.0.0

FLEXnet

Mac OS X System Requirements for the Network Li-
cense Manager

NOTE

The Network License Manager supports Ethernet network configurations

only.

Mac OS X hardware and software requirements for the network license server

Requirement

Hardware/Software

Mac OS

®

 X version 10.6 and higher

Operating system

Intel Mac

Computer/processor

Compatible with existing Ethernet network infrastructure

Network interface card

NOTE

The Network License Manager supports multiple network interface

cards, but at least one must be an Ethernet card.

TCP/IP

Communication protocol

NOTE

The Network License Manager uses TCP packet types

11.10.0.0

FLEXnet

86 | Chapter 4   Licensing Guide

Summary of Contents for AutoCAD Design Suite 2013











































































































































Reviews:

No comments