Autodesk AutoCAD Design Suite 2013, Installation Manual, Page: 110 / 138

NOTE For security reasons your startup item directory should be owned by
root, the group should be set to wheel, and the permission for the directory
should be 755.
sudo mv /Users/<user id>/adsknlm/
/Library/StartupItems/
sudo chown root /Library/StartupItems/adsknlm/
sudo chgrp wheel /Library/StartupItems/adsknlm/
sudo chmod 755 /Library/StartupItems/adsknlm/
sudo chown root /Library/StartupItems/adsknlm/*
sudo chgrp wheel /Library/StartupItems/adsknlm/*
9 Your resulting directory should look like this:
drwxr-xr-x
4 root wheel 136 Jul 31 01 01:50drwxr-xr-x
3 root wheel 102 Jul 30 01 21:59-rw-r--r--
1 root wheel 204 Jul 30 20:16
StartupParameters.plist-rwxr-xr-x
1 root wheel 417 Jul 31 00:45 adsknlm
10 Reboot your Mac and verify in the debug.log file (/Users/<user id>/NLG/)
that the lmgrd and adskflex start up successfully.
Linux License Server Configuration Procedure
To configure automatic start-up of a Linux license server
NOTE Before performing any system maintenance on your license server, see Stop
and Restart the License Server (page 111).
Before configuring your license server for Linux, ensure that the following
steps have been completed:
■ You have installed the Autodesk Network License Manager which contains
the following files: lmgrd, adskflex, and lmutil.
■ You have received the network license file from Autodesk that contains
the product licenses; for example, productlicense.lic.
1 Extract the FLEXnet IPv4 server files into the following directory:
/opt/flexnetserver.
2 Copy the .lic file into the flexnetserver directory created in Step 1.
3 Open a terminal window in root mode.
104 | Chapter 4 Licensing Guide