manualshive.com logo in svg

Autodesk 507B1-90A211-1301 - NavisWorks Manage 2010, User Manual

The Autodesk 507B1-90A211-1301 - NavisWorks Manage 2010 is a powerful software for project management and design coordination. With its comprehensive features, users can easily review, analyze, and communicate project information. Enhance your productivity by downloading the free user manual from manualshive.com to maximize your utilization of this exceptional tool.

Share
Download
background image

Install Autodesk Navisworks for Multiple Users

This section provides step-by-step instructions for installing network-licensed or multi-seat stand-alone versions
of the Autodesk Navisworks Manage 2010.

Quick Start to Network Administration and Deployment

Network deployment of this program requires careful planning and execution.

If you are not familiar with network administration and deployment, you should familiarize yourself with the
following topics before you attempt to deploy and administer the program over a network.

Deployment Preparation

To prepare for a deployment, you should take the time to review the following requirements and options.

System Requirements for a Deployment

This section contains the system requirements for the location of the administrative image that you create, the
network license server, and the client workstation.

Before you begin installing the program on a network, make sure that your servers and client workstations meet
the minimum recommended hardware and software requirements for a deployment.

Whether the Windows operating system is the 32-bit or the 64-bit version is automatically detected when
installing Autodesk Navisworks. You can choose which versions of Navisworks will be installed.

NOTE

Both the 32-bit version and 64-bit version of Autodesk Navisworks Manage 2010 can be installed on a 64-bit

version of Windows, but the 64-bit version of Autodesk Navisworks Manage 2010 cannot be installed on a 32-bit
version of Windows.

See the following tables for administrative image, license server, and client workstation system requirements.

Hardware and software requirements for the location of the administrative
image

Requirement

Hardware/Software

1.5 GB (recommended)

Hard disk

Hardware and software requirements for the network license server

Requirement

Hardware/Software

Windows Vista 32-bit

Operating system

Windows XP 32-bit

Windows 2003 Server Edition

AMD

®

 Athlon

®

, 3.0 GHz or faster (minim-

um)

Computer/processor

Intel

®

 Pentium

®

 IV, 3.0 GHz or faster (re-

commended)

Compatible with existing Ethernet network
infrastructure

Network interface card

28 | Chapter 3   Installation

Summary of Contents for 507B1-90A211-1301 - NavisWorks Manage 2010

























































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 507B1-90A211-1301 - NavisWorks Manage 2010

DAVIS Vantage Pro2 Updater Getting Started Manual preview
Vantage Pro2 Updater
Brand: DAVIS Pages: 12
Snom Configuring snom phones for Mass Deployment Frequently Asked Questions Manual preview
Configuring snom phones for Mass Deployment
Brand: Snom Pages: 22
AVIRA ANTIVIR VIRUS SCAN ADAPTER FOR SAP SOLUTIONS User Manual preview
ANTIVIR VIRUS SCAN ADAPTER FOR SAP SOLUTIONS
Brand: AVIRA Pages: 67
Am Mini-SOHO Quick Setup Manual preview
Mini-SOHO
Brand: Am Pages: 14
Seagate ST905003BPA1E1-RK - Maxtor BlackArmor 500 GB External Hard Drive Specifications preview
ST905003BPA1E1-RK - Maxtor BlackArmor 500 GB External Hard Drive
Brand: Seagate Pages: 2
NETGEAR 7200 Series User Manual preview
7200 Series
Brand: NETGEAR Pages: 282
Garmin Pilot for Android User Manual preview
Pilot for Android
Brand: Garmin Pages: 150
F-SECURE ANTI-VIRUS - FOR MICROSOFT EXCHANGE Deployment Manual preview
ANTI-VIRUS - FOR MICROSOFT EXCHANGE
Brand: F-SECURE Pages: 115
Z3 Technology Z3-DM8169-APP-L1-RPS User Manual preview
Z3-DM8169-APP-L1-RPS
Brand: Z3 Technology Pages: 46
F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 9.00 Administrator'S Manual preview
ANTI-VIRUS FOR MICROSOFT EXCHANGE 9.00
Brand: F-SECURE Pages: 174
FieldServer FS-8704-07 Driver Manual preview
FS-8704-07
Brand: FieldServer Pages: 15
Autodesk AUTOCAD P AND ID 2010 Brochure preview
AUTOCAD P AND ID 2010
Brand: Autodesk Pages: 4
Autodesk 657B1-000110-S001 - Maya - Mac Getting Started Manual preview
657B1-000110-S001 - Maya - Mac
Brand: Autodesk Pages: 5
Oracle WebLogic JSR-170 Adapter Supported Configurations preview
WebLogic JSR-170 Adapter
Brand: Oracle Pages: 6
Baby Lock Baby Lock Embroidery Professional PLUS Instructions preview
Baby Lock Embroidery Professional PLUS
Brand: Baby Lock Pages: 5
MACROMEDIA STUDIO 8-EXPLORING STUDIO 8 Manual preview
STUDIO 8-EXPLORING STUDIO 8
Brand: MACROMEDIA Pages: 350
FARONICS CORE Manual preview
CORE
Brand: FARONICS Pages: 99
DAVIS Weather Talker User Manual preview
Weather Talker
Brand: DAVIS Pages: 49

Brands by name

Popular brands

Load more brands