manualshive.com logo in svg

Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010, User Manual

Share
Download
Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual Download Page 765

Description

Name

Sets a link to a web page.

URL

Provides a description of the ceiling.

Description

Description of the assembly based on the assembly code selection.

Assembly description

Uniformat assembly code selected from hierarchical list.

Assembly code

A value to designate the particular ceiling, such as 1A, 2B, and so on. This value
must be unique for each ceiling in a project. Revit Architecture warns you if the

Type Mark

number is already used but allows you to continue using it. (You can see the warning
using the Review Warnings tool. See 

Reviewing Warning Messages

 on page 1415.)

Cost of the materials for constructing the wall.

Cost

Specifies the appearance of the ceiling in various views, including a raytraced model.
For more information on setting a material, see 

Materials

 on page 468.

Material

Ceiling Instance Properties

Description

Name

Constraints

The level at which the ceiling resides.

Level

Sets an offset for the ceiling relative to the specified level.

Height Offset From Level

Dimensions

Changes the value of the slope-defining line to the specified value, without the need
to edit the sketch. The parameter initially displays a value if there is a slope-defining
line. If there is no slope-defining line, the parameter is blank and disabled.

Slope

The ceiling’s perimeter. This is a read-only parameter.

Perimeter

The ceiling’s area. This is a read-only parameter.

Area

The ceiling’s volume. This is a read-only parameter.

Volume

Identity Data

Specific comments on the ceiling.

Comments

A user-defined label for the ceiling. This value must be unique for each ceiling in a
project. Revit Architecture warns you if the number is already used but allows you

Mark

to continue using it. (You can see the warning using the Review Warnings tool. See

Reviewing Warning Messages

 on page 1415.)

Phasing

The phase when the ceiling was created.

Phase Created

Ceiling Properties | 723

Summary of Contents for 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands