Home
/
Autodesk
/
256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010
/
User Manual

Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010, User Manual, Page: 59 / 1638

Share

Page: 59 / 1638

Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual Download Page 59

To return a license early

■

Click

➤

Licensing

➤

Return License Early.

Using Help

This section provides information about navigating the online help.

To access online help

Do one of the following:

■

In the InfoCenter box, click

(Help).

■

For context-sensitive help:

■

In a dialog, click

or Help.

■

Move the cursor over a tool on the ribbon. When its tooltip displays, press F1.

NOTE

If you turn off tooltips, context-sensitive help (F1) for ribbon tools is also turned off. If you want

context-sensitive help to be available, set Tooltip assistance to Minimal. See

on page 92.

Help Viewer Tabs

■

Contents.

The Contents tab resembles a Table of Contents in a printed book. Instead of chapter and page

numbers, there are books and pages with headings. Click a closed book, and it opens to display sub-books
or topic pages. When you click an open book, it closes. When you click pages, you select topics to view
in the right-hand pane of the HTML Help viewer. Note: Opening a book or page requires only a single
click.

■

Index.

The Index tab displays keywords for quick information searches in Revit Architecture. To open

the topic associated with a keyword, double-click the keyword, or select it and click Display. If the keyword
is used with more than one topic, a Topics Found dialog box is displayed so you can select a specific
topic to view.

■

Search.

Use the Search tab to search for words in the Help system and locate associated topics. After

typing the words you want to find, click List Topics.
The Search tab also includes advanced search capability. You can search for topics using wildcard (*,?)
and boolean characters (AND, OR, NEAR, NOT). To use Boolean searches, click the right arrow button
next to the search-string field.

■

Favorites.

Use the Favorites tab to bookmark topics that you visit frequently.

New Information Markers

On the Contents tab, red markers identify new chapters

and topics

.

Autodesk Training Programs and Products

Training programs and products from Autodesk

®

help you learn the key technical features of your Autodesk

software and improve productivity. For the latest information about Autodesk training, visit

http://www.autodesk.com/training

or contact your local Autodesk office.

Using Help | 17

«
...
57
58
59
60
61
...
»

Summary of Contents for 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments