Home
/
Autodesk
/
256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010
/
User Manual

Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010, User Manual, Page: 57 / 1638

Share

Page: 57 / 1638

Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual Download Page 57

Network License Client Setup

After you have set up a license server, follow this procedure in Revit Architecture to license a client machine.

NOTE

Client Setup is usually completed during product installation or network deployment.

To license a client machine

1

Click

➤

Licensing

➤

Product and License Information.

2

Select Network.

3

Enter the network server name.

4

Click Apply.

5

Click Close.

Licensing from Previous Versions of Revit Architecture

Each new release of Revit Architecture requires the current version of the standalone or network license.
Standalone or network licenses from previous versions do not work with the latest release of Revit Architecture.
If you do not have a current license, Revit Architecture runs in demo mode. See

Network License Cascading

For products purchased separately or as part of a Revit Architecture Series package, a network license server
can be set up with combinations of license seat counts. The cascading mechanism employed by Autodesk
first uses the single product license (non Series), and then cascades as needed to the Series licenses.

License Server Reporting

For more information about license server reporting and license server configuration, see the associated
documentation on the SAMreport-Lite utility that you can install with Revit Architecture.

Licensing Extension

If you have network licensing, and a license outage occurs, you can extend your licensing long enough to
save your work.

Outage Examples

■

You were using Revit Architecture, left your computer for over 2 hours but forgot to save, and all the
floating licenses, including yours, are now assigned to other users.

■

The machine that hosts the license server went down.

Saving Your Work in an Outage

If an outage occurs, you can save your work by using the Use Extension feature. You use an extension each
time you issue a command. For example, you click a tool on the ribbon, the dialog is displayed, and you
click Use Extension. This cycle repeats up to 10 times.

When you connect to the license server at the beginning of a Revit Architecture session, you get a set of 10
extensions.

Network License Cascading | 15

«
...
55
56
57
58
59
...
»

Summary of Contents for 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments