manualshive.com logo in svg

Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010, User Manual, Page: 346 / 1638

Share
Download
Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual Download Page 346

In this example, when you select the roof (created by extrusion), you can click Modify Roofs tab

 ➤ 

Modify

Roof panel

 ➤ 

Edit Profile, which opens the sketch (the pink lines in the following image) in sketch mode.

(For a roof created by footprint, select the roof and click Modify Roofs tab

 ➤ 

Edit panel

 ➤ 

Edit Footprint.)

Here you can edit the individual elements of the sketch. The tools that are available in sketch mode vary
depending on the type of element you are editing.

Sketching Elements

You can either draw sketch lines or use a Pick (Walls, Lines, Edges, Faces) option when sketching. Drawing
allows you to create the element by clicking and moving the cursor; Pick options allow you to select existing
walls, lines, edges or faces. As you sketch, you can use listening dimensions. For more information, see

Listening Dimensions

 on page 283.

When you add elements whose size or shape cannot be determined automatically, such as a roof, extrusion,
or opening, you enter sketch mode. In sketch mode, only the tools available for that sketch are available for
use; the tools vary depending on the type of element you are sketching. There are also elements (such as
walls) that are sketched but do not require the use of sketch mode.

Common Options for Sketches

to

Use this option

draw sketches.

Draw options (for example, 

(Line) or 

 (Rectangle))

select existing walls, lines, or edges. When you use Pick Lines, there is a Lock option
(for some elements) on the Options Bar that locks the picked line to the edge.

Pick options (for example, 
(Pick Lines))

TIP

You can use Tab to toggle to available chains.

add walls by selecting the face of a mass element or generic component. This option
is only available when you are sketching walls or curtain walls.

 Pick Faces

connect (chain) line segments when you are sketching so that the last point on the
previous line becomes the first point on the next line.

Chain

You cannot chain closed loops (circles, polygons) or fillets.

304 | Chapter 7   Sketching

Summary of Contents for 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments