manualshive.com logo in svg

Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010, User Manual

Share
Download
Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual Download Page 250

NOTE

If you open a Revit project that was created in Revit Structure, you may see in the list of

available filters Selection Filters and Rule-based filters. You can modify and apply rule-based filters in
Revit Architecture. You can also apply selection filters in Revit Architecture, but selection filters can
only be modified in Revit Structure.

3

To rename the filter, click 

 . Enter a new name for the filter, and click OK.

4

To delete the filter, click 

 . Click Yes to confirm the deletion.

5

Modify the categories and filter rules, as necessary.

6

Click OK.

Modifying Filter Visibility and Graphics Settings

1

Click View tab

 ➤ 

Graphics panel

 ➤ 

Visibility/Graphics, or type VV or VG to open the

Visibility/Graphics dialog.

Alternatively, right-click an element in the drawing area, and click Override Graphics in
View

 ➤ 

By Filter.

2

For Name, select the filter to modify.

3

Modify visibility, projection, surface, and cut line patterns and styles, halftone, and transparency,
as necessary.

4

Click OK.

Hiding Elements in a View

You can hide individual elements or categories of elements in a view permanently or temporarily. When
you hide an element that is used as a reference for a tag or a dimension, the tag or dimension is also hidden.
Hiding a revision cloud does not affect the revision table.

Hiding Elements

1

In the drawing area, select the element to hide.

2

Click Modify <Element> tab

 ➤ 

View Graphics panel

 ➤ 

Hide drop-down

 ➤ 

Elements, By Category,

or By Filter.

Alternatively, right-click the element, and click Hide in View

 ➤ 

Elements, By Category, or By

Filter.

If you select Element, the element is hidden in the view. If you select By Category, all elements of that
category are hidden in the view. If you select By Filter, the Filters tab on the Visibility/Graphic Overrides
dialog displays for modifying, adding, or removing filters.

Related topics

■

Revealing and Unhiding Hidden Elements

 on page 209

■

Temporarily Hiding or Isolating Elements or Element Categories

 on page 209

■

Applying Transparency to Faces of Model Element Categories

 on page 203

■

Controlling Visibility and Graphic Display of Elements Using Filters

 on page 204

208 | Chapter 5   Project Views

Summary of Contents for 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands