manualshive.com logo in svg

Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010, User Manual, Page: 237 / 1638

Share
Download
Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual Download Page 237

The dependent view opens. In the default Project Browser organization, the dependent view
displays under the primary view. If you customize the Project Browser display, dependent views
can be grouped and filtered like other view types.

3

Optionally, in the Project Browser, right-click the dependent view name, and click Rename.
Enter a new name for the view, and click OK.

4

Select the crop boundaries and resize as necessary to show only the necessary portion of the
view.

If crop regions are not visible click 

 (Show Crop Region) on the View Control Bar. You can

display model and annotation crop regions. For more information, see 

Crop Regions

 on page

211.

Adding Matchlines for Dependent Views

Matchlines are sketch lines that you can add to a view to indicate where a view is split, as shown in the
following image.

You can customize the look of matchlines by editing the line weight, color, and pattern in the Object Styles
dialog. See 

Object Styles

 on page 493. You can add view references near a matchline to link views. See

Navigating Primary and Dependent Views

 on page 196.

Adding a Matchline

1

Open the primary view from which your dependent views were created.

2

If crop regions are not visible, click 

 (Show Crop Region) on the View Control Bar.

The crop region for the primary view and the crop regions for dependent views are visible.

3

Click View tab

 ➤ 

Sheet Composition panel

 ➤ 

Matchline.

4

Sketch the matchline.

5

When finished, click Finish Matchline.

Modifying a Matchline

To edit the matchline sketch:

1

Open any view in which the matchline is visible, and select the matchline.

Adding Matchlines for Dependent Views | 195

Summary of Contents for 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments