Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010, User Manual, Page: 1306 / 1638

3 Edit or add elements in the workset, as necessary.
NOTE If you add view-specific elements, such as detail lines or dimensions, they are added to the
workset of the active project view.
Related topics
■ Reassigning an Element to a Different Workset on page 1256
■
Editing Workshared Projects on page 1258
■ Making Worksets Editable on page 1263
Visually Distinguishing Active Workset Elements
All elements that are not in the active workset can display as gray in the drawing area. Temporary elements,
such as temporary dimensions and controls, do not display in gray. This option has no effect on printing,
but helps to prevent adding elements to an undesired workset.
To visually distinguish the active workset:
1 Click Collaborate tab
➤
Worksets panel
➤
Worksets.
2 In the Worksets dialog, select Gray Inactive Workset Graphics, and click OK.
Alternatively, Click Collaborate tab
➤
Worksets panel
➤
Gray Inactive Worksets.
The following image shows a project floor plan where the Interior Layout workset is active, and all other
worksets are gray.
Filtering Non-Editable Workset Elements from Selection
When you select elements in the drawing area, you can filter any that are non-editable. This option is not
selected by default.
1 On the Quick Access toolbar, click (Modify).
2 On the Status Bar, select Editable Only.
3 In the drawing area, make your selection.
1264 | Chapter 20 Working in a Team