manualshive.com logo in svg

Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010, User Manual

Share
Download
Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual Download Page 1141

■

For End Segments Length, enter the length of the segments (in paper space) to display on
each end of the grid line.

■

Use the other parameters to indicate which grid bubble to use and where it should display.
See 

Grid Type Properties

 on page 1100.

4

Click OK.

Revit Architecture updates all grid lines of this type in all views.

Creating a Grid Line with a Center Segment

1

Open a view that displays grid lines.

2

Select a grid line, and click Modify Grids tab

 ➤ 

Element panel

 ➤ 

Element Properties

drop-down

 ➤ 

Type Properties.

3

In the Type Properties dialog, do the following:

■

For Center Segment, select Custom.

■

For Center Segment Weight, Center Segment Color, and Center Segment Pattern, specify
the line weight, color, and pattern of the center segment of the grid line.

■

For End Segment Weight, End Segment Color, and End Segment Pattern, specify the line
weight, color, and pattern of the end segments of the grid line.

■

For End Segments Length, enter the length of the segments (in paper space) to display on
each end of the grid line.

■

Use the other parameters to indicate which grid bubble to use and where it should display.
See 

Grid Type Properties

 on page 1100.

4

Click OK.

Revit Architecture updates all grid lines of this type in all views.

Grid Properties

You can change properties for individual grid lines or for grid types.

Modifying Grid Properties

1

In a project view, select a grid line and click Modify Grids tab

 ➤ 

Element panel

 ➤ 

Element

Properties.

2

In the Instance Properties dialog, edit instance properties.

See 

Grid Instance Properties

 on page 1101.

3

To edit type properties, click Edit Type.

See 

Grid Type Properties

 on page 1100. Changes made to type properties affect all grid lines of

that type in the project. You can click Duplicate to create a new grid line type.

4

Click OK.

Grid Properties | 1099

Summary of Contents for 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands