Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010, User Manual

Page: 1137 / 1638

Bubble dragged from grid line
When you move the bubble end out of line, the effect appears only in that view. The segments
created from dragging the bubble have a solid line style. You cannot change this style.
As you drag a control, the cursor snaps at points similar to the neighboring grids. The cursor also snaps as
the segments form straight lines.
Showing and Hiding Grid Bubbles
You can control whether grid bubbles display at either end of a grid line. You can do this graphically for an
individual grid line in a view, or for all grid lines of a particular type by changing type properties.
To show or hide individual grid bubbles
1 Open a view that displays grid lines.
2 Select a grid line.
Revit Architecture displays a check box near the grid bubble. You may need to zoom in to see
it clearly.
3 Clear the check box to hide the bubble, or select it to show the bubble.
You can repeat this process to show or hide the bubble at the opposite end of the grid line.
To show or hide grid bubbles using type properties
1 Open a view that displays grid lines.
2 Select a grid line, and click Modify Grids tab
➤
Element panel
➤
Element Properties
drop-down
➤
Type Properties.
3 In the Type Properties dialog, do any of the following:
■
To display grid bubbles at the start point of grid lines in a plan view, select Plan View Symbols
End 1 (Default).
■ To display grid bubbles at the endpoint of grid lines in a plan view, select Plan View Symbols
End 2 (Default).
Modifying Grids | 1095