manualshive.com logo in svg

Autodesk 235B1-05A761-1301 - AutoCAD MEP 2010, User Manual, Page: 253 / 878

Share
Download
Autodesk 235B1-05A761-1301 - AutoCAD MEP 2010 User Manual Download Page 253

then…

If you want to…

select Merge, click the Select Object icon, and select the
segments to merge.

merge multiple segments

Locking the Size of a Duct or Fitting

Use this procedure to lock the size of a duct component when modifying a run. When a component is
locked, its size cannot be changed even if the entire branch is being resized. Transition fittings are added to
each end of the locked object. For example, if a duct segment passes through an area with limited clearance,
you can lock the size for that segment.

To lock the size of a duct segment or fitting

1

Select the segment or fitting.

2

Lock the size by doing one of the following:

■

Click [Duct/Duct Flex/Duct Fitting] tab

 ➤ 

Modify panel

 ➤ 

[Duct/Flex Duct/Duct Fitting]

Modify. On the Modify dialog, click 

 .

■

On the Properties palette, expand Advanced, and under Calculation Settings, specify Yes for
Lock Size.

Modifying the System Assigned to a Duct

Use this procedure to change the system of a duct run. Systems are defined to help maintain consistency
throughout a run and across multiple drawings in a project. When you change a segment’s system, all
components having valid connections to the selected segment are updated to the new system.

To modify the system assigned to a duct

1

Select the duct segment.

2

Click Duct tab

 ➤ 

Modify panel

 ➤ 

Duct Modify

 .

3

In the Modify Duct dialog, select a new system from the System drop-down list, and click OK.

Modifying a Duct Fitting

Use this procedure to change the size or subtype of a duct fitting.

1

Select the duct fitting, and click Duct Fitting tab

 ➤ 

Modify panel

 ➤ 

Duct Fitting Modify

 .

2

In the Modify Duct Fitting dialog, modify the fitting:

then…

If you want to modify…

click the Part tab. In the part type folder, select a differ-
ent part subtype.

NOTE

You cannot change the type of part, for

example, change an elbow to a tee. To replace
the part with one of a different type, erase the
part and add a new one.

the part subtype (for example, change a mitered el-
bow to a smooth radius elbow)

Modifying Duct | 235

Summary of Contents for 235B1-05A761-1301 - AutoCAD MEP 2010















































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments