manualshive.com logo in svg

Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK, Tutorials Manual, Page: 98 / 332

Share
Download
Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK Tutorials Manual Download Page 98

Exercise 1: Delete duplicates

If the endpoints of lines or geometry fall within a specified tolerance, they
are considered duplicates. Duplicates can be impossible to see, even when
zoomed in close. Drawing Cleanup can find such instances and you can decide
whether to delete them. In this exercise, you clean up a street map by deleting
duplicate objects.

To delete duplicates

1

Before you begin this tutorial, see 

Lesson 1: Get Ready to Use the Tutorials

(page 1).

2

Navigate to and open the sample tutorial file Street_Centerlines.dwg.

3

Zoom to the extents of the drawing. In the Tool-based Ribbon Workspace,
click View tab

 ➤ 

Navigate panel

 ➤ 

Zoom Drop-down

 ➤ 

Extents.

4

Click Tools tab

 ➤ 

Map Edit panel

 ➤ 

Clean Up. 

5

Specify which objects to include in the cleanup operation. In this case,
include all objects.

■

In the Drawing Cleanup - Select Objects dialog box, under Objects to
Include In Drawing Cleanup, choose Select All.

■

Make sure there is an asterisk (*) in the Layers box.

Select all objects to include in the cleanup operation.

90 | Chapter 3   Tutorial: Moving From AutoCAD to AutoCAD Map 3D

Summary of Contents for 15606-011408-9005 - MAP R6.3 NAMED-10U PK













































































































































































































































































































































Reviews:

No comments