Home
/
Autodesk
/
15606-011408-9005 - MAP R6.3 NAMED-10U PK
/
Tutorials Manual

Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK, Tutorials Manual, Page: 97 / 332

Share

Page: 97 / 332

Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK Tutorials Manual Download Page 97

The order in which you select the points and the spread of the points
affects the results. For complex curved figures, more vertices result in
a more accurate alignment.

■

Select the object to align it with the reference area.

■

Enter

s

to select the objects to rubber sheet.

■

Click the subdivision block to select it.

■

Press Enter to complete the process.
For more information about this procedure, and to see an
animation of the rubber sheet procedure, see Georeference parcels
by rubber sheeting.

Where you are now

You created a drive alias for drawings stored on a shared drive. You
georeferenced drawing objects, using the Rubber Sheet command to align
them with known locations.

To continue this tutorial, go to

Lesson 2: Clean Up Your Drawings

(page 89).

Lesson 2: Clean Up Your Drawings

Drawings can contain various kinds of errors that make accurate mapping
difficult. For example, digitizing from a paper map can produce lines that
were actually creases in the paper.

Drawings edited by multiple people can contain duplicate lines or objects.
Finding duplicate objects in the same location can be nearly impossible without
the right tools.

If lines in your drawing do not connect precisely at endpoints, data that
appears to be precise can actually be inaccurate. Locating these issues visually
can take hours.

AutoCAD Map 3D has an option called Drawing Cleanup to help you correct
common geometry errors. In this lesson, you clean up a street map by deleting
duplicate objects and extending undershoots. It is best to perform each
operation separately, so you can see the result of each operation before
performing the next one.

Optionally, you can use a cleanup profile to automate the drawing cleanup
process with scripts or to share settings with other users.

Lesson 2: Clean Up Your Drawings | 89

«
...
95
96
97
98
99
...
»

Summary of Contents for 15606-011408-9005 - MAP R6.3 NAMED-10U PK













































































































































































































































































































































Reviews:

No comments