manualshive.com logo in svg

Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK, Tutorials Manual, Page: 75 / 332

Share
Download
Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK Tutorials Manual Download Page 75

NOTE

This exercise uses the BuildMap1.dwg map you created and modified in the

previous exercises.

To edit the feature information

1

Redisplay the Data Table for the Parcels layer.

Select the Parcels layer and click Table, or right-click the Parcels layer and
click Show Data Table.

2

In the 

Data Table

 (page 310)

, select Autogenerated_SDF_ID from the Filter

By list and enter the parcel ID number you noted earlier (the one you
just edited).

3

Click Apply Filter to filter the list and see the parcel entry.

4

Change the area of the parcel and close the Data Table.

5

Update the information in the data source. Click Feature Edit tab

 ➤ 

Edit

Set panel

 ➤ 

Check In. 

The information is now available to other users.

6

Save your map.

Where you are now

You edited a parcel and updated its data to reflect your changes. You checked
in the feature to update the source file.

To continue this tutorial, go to 

Lesson 7: Create a Legend

 (page 67)

Lesson 7: Create a Legend

Create a legend that lists the layers in your map, using a color key that
identifies each one. The legend is an object that you drop into place on your
map.

Fine-tune the legend to show only the layers you want, in the order in which
you want them. This order might be different from your draw order.

Exercise 1: Insert a legend object

Insert a legend anywhere on your map.

Lesson 7: Create a Legend | 67

Summary of Contents for 15606-011408-9005 - MAP R6.3 NAMED-10U PK













































































































































































































































































































































Reviews:

No comments