Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK Tutorials Manual Download Page 50

Page: 50 / 332

NOTE

Do not change the Tables setting.

Leave Operator set to = . For Value, enter

Shasta

Define the data condition for the query.

The query is case sensitive. Be sure to enter it as shown.

Click OK in the Data Condition dialog box, and then click OK again to
execute the query.

In the Tool-based Ribbon Workspace, click View tab

➤

Navigate

panel

➤

Zoom drop-down

➤

Extents.

The Shasta county boundaries are now displayed in the map, and an
Attached Drawing Element layer is displayed in Display Manager.

Save your work. Click

➤

Save.

42 | Chapter 2 Tutorial: Building a Map

Summary of Contents for 15606-011408-9005 - MAP R6.3 NAMED-10U PK













































































































































































































































































































































Search results

Summary of Contents for 15606-011408-9005 - MAP R6.3 NAMED-10U PK

Reviews:

Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK, Tutorials Manual, Page: 50 / 332

Search results

Summary of Contents for 15606-011408-9005 - MAP R6.3 NAMED-10U PK

Reviews: