manualshive.com logo in svg

Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK, Tutorials Manual, Page: 300 / 332

Share
Download
Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK Tutorials Manual Download Page 300

To examine the results of the split

1

In the Data Table, examine the attribute values for the new parcels.

The Data Table now shows two parcels on Antigua Drive.

The Data Table contains two new entries for the split parcels. The address is null
because you specified “Empty” as the split value for this property.

2

Right-click each new parcel and click Check In Feature.

Where you are now

You set up rules for splitting parcels and allocating property values to the
resulting parcels. You used the Split command to divide one parcel into two
uneven pieces. You examined the results in the Data Table.

To continue this tutorial, go to 

Lesson 3: Use Joined Data to Create Calculated

Properties

 (page 292).

Lesson 3: Use Joined Data to Create Calculated
Properties

The parcel data does not contain information about the owners. Join the
Parcels layer to a Microsoft Access database that contains owner information.

To connect to an Access database from AutoCAD Map 3D, set up an ODBC
connection for that database using a control panel in Windows. Then, connect
to this source using Data Connect, just as you connected to the physical data
sources in your map. The database source contains a field that you can match
to a property in the Parcels layer, so you can join the data to the parcels. Using
the combined data, you create a calculated property that is stored in the map
but is not saved back to the original data stores. This property is not available
in either original data source alone. It requires a join and a calculation to
create it.

292 | Chapter 8   Tutorial: Working with Polygon Features

Summary of Contents for 15606-011408-9005 - MAP R6.3 NAMED-10U PK













































































































































































































































































































































Reviews:

No comments