Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK, Tutorials Manual, Page: 297 / 332

6 Place your cursor over the text that says “value.”
7 In the tooltip that displays, click Get Values From A List.
8 Click the green arrow next to STNAME in the properties list to see the
street names for the Parcels feature.
The properties list is populated when you click the green arrow. Your selection replaces
the selected value.
9 Click Antigua Drive and click Insert Value.
Click Next if you do not see Antigua in the list.
10 Click Validate (at the bottom of the window) to make sure that the
expression is valid.
11 When you see “The expression is valid,” click OK.
12 Click the heading for the STNAME column to sort the parcel records by
street name.
In the Data Table, the entries for parcels on Antigua Drive are highlighted.
The map is zoomed to that street, and the parcels are selected in the map
as well.
To continue this tutorial, go to Exercise 3: Split the parcel (page 290).
Exercise 2: Find the parcel to split | 289