manualshive.com logo in svg

Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK, Tutorials Manual, Page: 295 / 332

Share
Download
Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK Tutorials Manual Download Page 295

Set rules for assigning properties after a split or merge operation.

Each property of the Parcels feature is listed under Feature Properties on
the left. Two properties (Geom and FeatID) are generated by the data
store, so you cannot set rules for them. If you select them, you can see
the rules that the data store uses to create them.

3

In the Split And Merge Rules dialog box, click the ADDRESS property.

4

For the Split Rule, specify Empty.

If you split this parcel, you must specify the address number for each
new parcel that is created.

5

For the Merge Rule, specify First Selected.

If you merge multiple parcels into one, the new parcel uses the address
number of the first parcel you select for the merge.

6

Specify rules for other properties, using the following table as a guide.

Merge rule

Split rule

Property

Sum

Proportional Based On Area2D (Geom)

ACRES

First Selected

Copy

APN

Sum

Proportional Based On Area2D (Geom)

AREA

Exercise 1: Define split/merge rules  | 287

Summary of Contents for 15606-011408-9005 - MAP R6.3 NAMED-10U PK













































































































































































































































































































































Reviews:

No comments