Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK Tutorials Manual Download Page 293

Page: 293 / 332

Exercise 2: Bring in the parcel data

Now, add a layer that displays parcels within the city of Redding. This layer
contains size, value, and address information about the parcels.

NOTE

This exercise uses the map you created in

Lesson 1: Connect to Parcel Data

(page 284).

To add the parcel layer to the map

In Display Manager, click Data

➤

Connect To Data.

In the Data Connect window, under Data Connections By Provider, click
Add SDF Connection.

Click the file icon next to the Source File field and navigate to the folder
containing the sample files.

Select Assessor_Parcels.SDF and click Open.

In the Data Connect window, click Connect.

In the Data Connect window, click Add To Map.

Close the Data Connect window.

To see the data associated with this layer, select the Parcels layer in Display
Manager and click Table.

Scroll to the right to see all the columns of parcel data.

Leave the Data Table open for the next exercise.

Where you are now

You connected to a data store containing parcel information. You viewed the
geometry in your map and the attribute data in the Data Table.

To continue this tutorial, go to

Lesson 2: Split a Polygon Feature

(page 286).

Exercise 2: Bring in the parcel data | 285

Summary of Contents for 15606-011408-9005 - MAP R6.3 NAMED-10U PK













































































































































































































































































































































Search results

Summary of Contents for 15606-011408-9005 - MAP R6.3 NAMED-10U PK

Reviews:

Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK, Tutorials Manual, Page: 293 / 332

Search results

Summary of Contents for 15606-011408-9005 - MAP R6.3 NAMED-10U PK

Reviews: