The "Property1" entry on the left is updated to show the new name.
9
Click OK and confirm your changes to close the Schema Editor.
To continue this tutorial, go to
Exercise 5: Populate the new property with
values
(page 271).
Exercise 5: Populate the new property with values
After you add a property to a feature class, you enter the values for that
property for each feature in the feature class.
NOTE
This exercise uses the map you modified in
Exercise 2: Connect to the new
SDF data
(page 264).
To populate the new properties with data
1
Expand the SDF entry in Map Explorer until you see its three feature
classes. Select Roads and click Table.
2
In the Data Table, scroll all the way to the right to see the new property.
3
Enter the number of lanes for a few roads.
If you enter a value that is outside the allowable range and click outside the field, a
warning is displayed.
Exercise 5: Populate the new property with values | 271
Summary of Contents for 15606-011408-9005 - MAP R6.3 NAMED-10U PK
