Home
/
Autodesk
/
15606-011408-9005 - MAP R6.3 NAMED-10U PK
/
Tutorials Manual

Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK, Tutorials Manual, Page: 278 / 332

Share

Page: 278 / 332

Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK Tutorials Manual Download Page 278

4

In the Schema Editor, expand the schema tree on the left to see the three
feature classes.

5

Select the Roads feature class.

6

Click New Property at the top of the window.

Property1 appears on the left, under the existing properties.

7

Specify the characteristics of the new property using the information
shown in this illustration:

Create a property with these values. The last four fields appear
after setting the Constraint Type.

These values create a property that represents the number of lanes for a
road. The value must be a whole number from 1 through 5, inclusive.
There is no default value for this property.

By setting Min Value Included and Max Value Included to true, the
highest and lowest values in the range are acceptable entries.

8

Click Apply and confirm your changes.

270 | Chapter 7 Tutorial: Managing Data From Different Sources

«
...
276
277
278
279
280
...
»

Summary of Contents for 15606-011408-9005 - MAP R6.3 NAMED-10U PK













































































































































































































































































































































Reviews:

No comments