manualshive.com logo in svg

Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK, Tutorials Manual, Page: 247 / 332

Share
Download
Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK Tutorials Manual Download Page 247

Lesson 5: Automate an Overlay Operation with a
Workflow

In 

Lesson 4: Perform a Flood Analysis with Overlay

 (page 229), you compared

two SDF layers using an overlay. In this lesson, you automate that process
with a workflow.

Exercise 1: Edit a workflow

A workflow automates a set of processes. You can specify the parameters for
the processes, or fill them in when you (or others) run the workflow.

In this lesson, you edit the predefined workflow that connects to two data
stores and compares the resulting feature layers with an overlay. You will
specify the same data stores and overlay parameters that you used in 

Lesson

4: Perform a Flood Analysis with Overlay

 (page 229).

To edit the workflow

1

In AutoCAD Map 3D, create a map.

■

Click 

 ➤ 

New 

 ➤ 

Drawing.

■

Select the map2d.dwt template and click Open.

2

Click Tools tab

 ➤ 

Workflow panel

 ➤ 

Edit. 

3

In the Workflow Designer, expand the parallel activity at the top of the
workflow diagram.

Each entry within the parallel activity connects to one of the data stores
you need. Because the connections are parallel, AutoCAD Map 3D
performs them both, even if the first one fails. If one of the connections
fails, AutoCAD Map 3D tries it again until it times out.

Lesson 5: Automate an Overlay Operation with a Workflow | 239

Summary of Contents for 15606-011408-9005 - MAP R6.3 NAMED-10U PK













































































































































































































































































































































Reviews:

No comments