Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK Tutorials Manual Download Page 238

Page: 238 / 332

For a complete description of the overlay types, see Overlaying Two Feature
Sources.

For a tutorial on how to automate the overlay process using a workflow, see

Lesson 5: Automate an Overlay Operation with a Workflow

(page 239).

Exercise 1: Add the layers to compare

To begin an overlay analysis, connect to the layers you are comparing and
add them to a map.

To add the layers to compare

If you have not already done so, copy the

sample files for the tutorials

(page 2) to a directory on your hard drive.

Start AutoCAD Map 3D and create a map using the map2d.dwt template.

Assign a coordinate system to the new map.

■

Click Map Setup tab

➤

Coordinate System panel

➤

Assign.

You can also right-click the current drawing to set
the coordinate system for the map in Map Explorer.

■

Specify the CA-I coordinate system.

230 | Chapter 6 Tutorial: Analyzing Data

Summary of Contents for 15606-011408-9005 - MAP R6.3 NAMED-10U PK













































































































































































































































































































































Search results

Summary of Contents for 15606-011408-9005 - MAP R6.3 NAMED-10U PK

Reviews:

Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK, Tutorials Manual, Page: 238 / 332

Search results

Summary of Contents for 15606-011408-9005 - MAP R6.3 NAMED-10U PK

Reviews: