Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK, Tutorials Manual, Page: 165 / 332

NOTE This exercise uses the map you created in Exercise 1: Create a map (page
154).
To assign a coordinate system to the current map and to the attached
drawings
1 Click Map Setup tab
➤
Coordinate System panel
➤
Assign.
Assign a coordinate system to the current and attached
drawings.
2 Under Current Drawing, for Code, type CA-I (uppercase C, uppercase A,
hyphen, uppercase I). Press Enter. The dialog box displays the description
of this coordinate system.
3 Under Source Drawings, click Select Drawings and select all three attached
drawings. Click Add and then click OK.
4 Under Source Drawings, for Code, type CA-I and press Enter (as in step
2).
5 Click OK.
To continue this tutorial, go to Exercise 3: Query in objects (page 158).
Exercise 2: Assign a coordinate system | 157