Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK, Tutorials Manual, Page: 152 / 332

Value Property
Roads Layer
No value Linetype
13 Lineweight
NOTE To specify a lineweight, enter the decimal value as an integer. For
example, to specify a lineweight of 0.13, enter 13 (as indicated in the table).
8 Specify the object data fields and their values.
For object data fields, clear the values that are specific to the model object
you chose. For example, include the NAME and ST_NAME properties to
ensure that all new roads you create contain those properties. Delete the
values that appear there, because each new road name will differ from
the name of the model object.
For example, click the ST_NAME property and look at its values. The
default value for the street name is the name of the model object. This
value is incorrect for almost any new road you create. Select that value
and delete it.
Objects assigned to this class have a ST_NAME property, but the value
will be the name for that road (as stored in its object properties). If no
value exists, the property is blank. The following table shows a suggested
set of OD:Schema_Roads properties and values for the Roads class.
Value Property
No value Autogenerated_SDF_ID
No value LENGTH
No value NAME
No value PREFIX
No value SEG_ID
No value ST_NAME
No value ST_TYPE
144 | Chapter 4 Tutorial: Classifying Drawing Objects