manualshive.com logo in svg

Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK, Tutorials Manual, Page: 125 / 332

Share
Download
Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK Tutorials Manual Download Page 125

NOTE

You can manually adjust the insertion values as needed.

■

Click OK.
The image is correctly placed in the drawing.

6

Save the file.

■

Click 

 ➤ 

Save As

 ➤ 

AutoCAD Drawing.

■

In the Save As dialog box, navigate to the folder you created for your
tutorial maps.

■

Click Save.

To continue this tutorial, go to 

Exercise 2: View image information

 (page 117).

Exercise 2: View image information

You can view the file name, size, density, depth, and type for an image you
inserted. You can also view the date the image was created and modified, and
the layer on which it resides.

In this exercise, you view information about the raster image in two ways.
The second method displays some additional information, such as the width
and height of the image.

NOTE

This exercise uses the CITY.dwg map you used in 

Exercise 1: Insert a raster

image

 (page 114).

To view information about a raster image

1

If the CITY.dwg map is not still open, reopen it.

2

In the drawing area, place your cursor over the image, hold down the
Shift key and click the image.

3

Click Insert tab

 ➤ 

Image panel

 ➤ 

Image Management. 

4

In the Image Management dialog box, view information about the
REDDING_DRG image.

Exercise 2: View image information | 117

Summary of Contents for 15606-011408-9005 - MAP R6.3 NAMED-10U PK













































































































































































































































































































































Reviews:

No comments