Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK Tutorials Manual Download Page 108

Page: 108 / 332

Attach drawings from the Map Explorer tab
of the Task pane.

In the Select Drawings to Attach dialog box, do the following:

■

Navigate to the location where you stored your tutorial sample files.

■

Press and hold the

Ctrl

key and select the following files: Drainage,

Parcel, and Sewer.

■

Click Add.

■

Click OK.
The parcel, sewer, and drainage drawings are now attached to the
Redding.dwg file, but no drawing objects have been added yet.

To continue this tutorial, go to

Exercise 2: Preview attached drawings with

Quick View

(page 100).

Exercise 2: Preview attached drawings with Quick View

Quick View temporarily displays all data in the attached drawings in your
drawing file. The drawing objects are not copied into the drawing.

NOTE

This exercise uses the Redding.dwg map you created and modified in

Exercise

1: Attach source drawings

(page 99).

100 | Chapter 3 Tutorial: Moving From AutoCAD to AutoCAD Map 3D

Summary of Contents for 15606-011408-9005 - MAP R6.3 NAMED-10U PK













































































































































































































































































































































Search results

Summary of Contents for 15606-011408-9005 - MAP R6.3 NAMED-10U PK

Reviews:

Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK, Tutorials Manual, Page: 108 / 332

Search results

Summary of Contents for 15606-011408-9005 - MAP R6.3 NAMED-10U PK

Reviews: