manualshive.com logo in svg

Autodesk 05720-017408-9621 - AE AUTOCAD LT 2000I LAB-PK 10U CD, Tutorial, Page: 17 / 21

Share
Download
Autodesk 05720-017408-9621 - AE AUTOCAD LT 2000I LAB-PK 10U CD Tutorial Download Page 17

1-16     AutoCAD

®

 LT 2000 MultiMedia Tutorial  

 

  

2.  In the command prompt area, the message “Specify center point for circle or 

[3P/2P/Ttr (tan tan radius)]:” is displayed. AutoCAD expects us to identify 
the location of a point or enter an option. We can use any of the four 
coordinate entry methods to identify the desired location. We will enter the 
world coordinates (3,3) of the center point for the first circle. 

 

Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: 3,3 [Enter] 

 

3.  In the command prompt area, the message “Specify diameter of circle:” is 

displayed. 

 

Specify diameter of circle: 2.5  [Enter] 

 

 

 

4.  Inside the Graphics window, right-mouse-click 

to bring up the popup option menu. 

 
5. Pick 

Repeat Center, Diameter with the left-

mouse-button in the popup menu to repeat the 
last command. 

 
6.  Using the relative rectangular coordinates entry 

method, relative to the center-point coordinates 
of the first circle, we specify the location as 
(2.5,2). 

 

Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: @2.5,2 [Enter] 

Summary of Contents for 05720-017408-9621 - AE AUTOCAD LT 2000I LAB-PK 10U CD






















Reviews:

No comments