manualshive.com logo in svg

Autodesk 05720-017408-9621 - AE AUTOCAD LT 2000I LAB-PK 10U CD, Tutorial, Page: 15 / 21

Share
Download
Autodesk 05720-017408-9621 - AE AUTOCAD LT 2000I LAB-PK 10U CD Tutorial Download Page 15

1-14     AutoCAD

®

 LT 2000 MultiMedia Tutorial  

 

  

11. Using the relative rectangular 

coordinates entry method to 
create the next line, we can 
imagine a reference coordinate 
system aligned at the previous 
point. Coordinates are measured 
along the two reference axes. 

 
Specify next point or [Close/Undo]: 
@-1.5,1  [Enter] 
(-1.5 and 1 inches are measured 
relative to the reference point.) 

 
 

12. Move the cursor directly to the left of the last point and use the direct distance 

entry technique by entering 6.5 [Enter]. 

 

13. For the last segment of the sketch, we can use the CLOSE option 

to connect back to the starting point. Inside the Graphics 
window, right-mouse-click and a popup menu appears on the 
screen. 

 

14. Select Close with the left-mouse-button to connect back to the 

starting point and end the LINE command.  

 
 

 
 

Reference Coordinate System 
aligned at the previous point 

Summary of Contents for 05720-017408-9621 - AE AUTOCAD LT 2000I LAB-PK 10U CD






















Reviews:

No comments