manualshive.com logo in svg

Autodesk 00308-011408-9F30A - VLA AUTOSKETCH R8-MEDIA W9X/NT, User Manual, Page: 81 / 400

Share
Download
Autodesk 00308-011408-9F30A - VLA AUTOSKETCH R8-MEDIA W9X/NT User Manual Download Page 81

Using the Grid Edit Bar

|

71

To change grid types

1

Click the Edit Grid button on the Standard toolbar. The Grid edit bar 
appears.

2

Select a grid type from the Grid Type drop-down list box.

3

(optional) Enter new coordinates for the grid origin in the Grid Origin text 
box and press ENTER. 

4

(optional) If you selected a circular grid, enter a new angle in the Circular 
Grid Angle text box. This is the angle between radial gridlines. Since the 
sum of all the angles must equal 360, smaller angles will result in the 
display of more major lines. 

Changing Other Grid Settings on the Grid 
Edit Bar

You can also change settings such as the grid snap interval and grid angle 
from the Grid edit bar. This is especially useful when a specific task requires 
you to align some points to a known angle or point, or at specific intervals.

To change other grid settings

1

Click the Edit Grid button on the Standard toolbar. The Grid edit bar 
appears.

2

(optional) Enter a new value in the Grid Snap Interval text box.

3

(optional) Enter a new value in the Major Line Interval text box. This 
number should be a multiple of the grid snap interval.

4

(optional) If you selected Subdivisions from the Minor Style drop-down 
list box, enter the number of subdivisions in the Minor Subdivisions text 
box.

5

(optional) If you selected Offset or Double Offset from the Minor Style 
drop-down list box, enter a value in the Offset Distance text box.

6

(optional) If you are using a circular grid, and if you selected Offset or 
Double Offset from the Minor Style drop-down list box, enter a value in 
the Angular Offset text box.

7

(optional) If you are using a circular grid, enter a new value in the Circular 
Grid Angle text box.

8

(optional) Enter new coordinates for the grid origin in the Grid Origin text 
box.

9

(optional) Enter a new rotation angle in the Grid Angle text box.

Using buttons on the Grid edit bar, you can also make changes on Options 
pages that relate to the reference grid. 

Summary of Contents for 00308-011408-9F30A - VLA AUTOSKETCH R8-MEDIA W9X/NT

















































































































































































































































































































































































































Reviews:

No comments