Autodesk 00308-011408-9F30A - VLA AUTOSKETCH R8-MEDIA W9X/NT, User Manual, Page: 349 / 400

Removing Fields
|
339
Removing Fields
AutoSketch allows you to remove fields from specific entities or from the
entire drawing. On the Database menu, click Options to remove a field.
When you remove a field in this manner, the value stored in the field is lost,
because there is no longer a container to store the value. On the Database
menu, click Delete Field to remove fields from specific entities.
To unassign a field from a selection set
1 Select the entity whose fields you want to unassign.
2 On the Database menu, click Delete Field. The Delete Field dialog box
appears.
3 Click a field in the list that you want to unassign from the selected entity.
4 Click OK.
To delete a field from the drawing
1 On the Database menu, click Options. The Database Options dialog box
appears.
2 Click the Fields page tab. Any existing fields in the drawing are displayed.
3 Click the field you want to delete.
4 Click Delete. AutoSketch displays a dialog box asking if it is OK to delete
the field.
5 Click OK. Repeat steps 2–4 to remove another field from the drawing.
6 Click Close.