manualshive.com logo in svg

Autodesk 00308-011408-9F30A - VLA AUTOSKETCH R8-MEDIA W9X/NT, User Manual, Page: 247 / 400

Share
Download
Autodesk 00308-011408-9F30A - VLA AUTOSKETCH R8-MEDIA W9X/NT User Manual Download Page 247

Diameter Dimensions

|

237

Changing Diameter Dimensions With the Mouse

You can reshape a diameter dimension after it is drawn by double-clicking on 
it and dragging the appropriate vertex to new locations. You can use this 
technique to change the angle of the dimension line or to move the 
dimension label.

To change the angle of a diameter dimension

1

Double-click the dimension or right-click it and click Edit Vertices on the 
pop-up menu.

2

Click the vertex on the dimension line and drag it to the new location. 
The dimension line is rotated so it passes through the point you enter. The 
dimension label remains in the same relative location.

To move the label and change the angle of a diameter dimension

1

Double-click the dimension or right-click it and click Edit Vertices on the 
pop-up menu.

2

Click the vertex on the dimension label and drag it to the new location. 
The dimension label moves to the new location and the dimension is 
aligned to match.

To move the label of a diameter dimension

1

Double-click the dimension or right-click it and click Edit Vertices on the 
pop-up menu.

2

Press CTRL and drag the handle to the new location.

To center a diameter dimension label after moving it.

1

Double-click the dimension or right-click it and click Edit Vertices on the 
pop-up menu.

2

Type 

C

 to switch to Centerpoint snap.

3

Click the vertex on the dimension label and drag it to any point on the 
arc or circle edge. The label moves to the center.

Summary of Contents for 00308-011408-9F30A - VLA AUTOSKETCH R8-MEDIA W9X/NT

















































































































































































































































































































































































































Reviews:

No comments