manualshive.com logo in svg

Autodesk 00308-011408-9F30A - VLA AUTOSKETCH R8-MEDIA W9X/NT, User Manual, Page: 205 / 400

Share
Download
Autodesk 00308-011408-9F30A - VLA AUTOSKETCH R8-MEDIA W9X/NT User Manual Download Page 205

Customizing 3D Effects

|

195

Changing Isometric Origin Settings

The 3D Effects Options dialog box allows you to control the way the isomet-
ric origin is selected when using Transform Isometric tools. When Use 
Default Isometric Origin check box is unchecked, AutoSketch requires you to 
click a point of origin from which the skew is applied. When this option is 
checked, AutoSketch automatically skews the entity from the default isomet-
ric origin. The location of the default origin depends on which isometric 
command you are using:

■

Transform Top Isometric originates from the lower-left corner of the entity 
and skews along 30- and 150- degree axes.

■

Transform Left Isometric originates from the lower-right corner of the entity 
and skews the entity along 90- and 150- degree axes.

■

Transform Right Isometric originates from the lower-left corner of the entity 
and skews the entity along 90- and 30- degree axes.

To change the way the isometric origin is selected

1

Click the 3D Effects button on the Standard toolbar. The 3D Effects toolbar 
appears.

2

Click the 3D Effects Options button on the 3D Effects toolbar. The 
3D Effects Options dialog box appears.

3

Check the Use Default Isometric Origin check box at the bottom of the 
dialog box. When this option is checked, AutoSketch automatically skews 
the entity from the default isometric origin. When this option is 
unchecked, AutoSketch requires you to click a point of origin from which 
the skew is applied.

4

Click OK.

Summary of Contents for 00308-011408-9F30A - VLA AUTOSKETCH R8-MEDIA W9X/NT

















































































































































































































































































































































































































Reviews:

No comments