manualshive.com logo in svg

Autodesk 00308-011408-9F30A - VLA AUTOSKETCH R8-MEDIA W9X/NT, User Manual, Page: 169 / 400

Share
Download
Autodesk 00308-011408-9F30A - VLA AUTOSKETCH R8-MEDIA W9X/NT User Manual Download Page 169

Drawing Circles Based on Points

|

159

Drawing Circles Based on Points

You can add circles to a drawing by using any of six commands on the Draw 
menu. The first four commands allow you to add circles based on points you 
know.

To draw a circle by entering the centerpoint and a point on the circle

1

On the Draw menu, click Circle, Center, Side, or click the Center-Side 
Circle button on the All-In-One toolbar.

2

Click the centerpoint or a point on the circle. A small diamond marks the 
point and a rubber-band circle appears.

3

Click a point on the circle or press CTRL and click the centerpoint.

To draw a circle by entering two points on opposite sides of the circle

1

On the Draw menu, click Circle, Side, Side, or click the Side-Side Circle 
button on the All-In-One toolbar.

2

Click a point on the circle. A diamond marks the point and a rubber-band 
circle appears.

3

Click a point on the opposite side of the circle.

Summary of Contents for 00308-011408-9F30A - VLA AUTOSKETCH R8-MEDIA W9X/NT

















































































































































































































































































































































































































Reviews:

No comments