manualshive.com logo in svg

Autodesk 00308-011408-9F30A - VLA AUTOSKETCH R8-MEDIA W9X/NT, User Manual, Page: 168 / 400

Share
Download
Autodesk 00308-011408-9F30A - VLA AUTOSKETCH R8-MEDIA W9X/NT User Manual Download Page 168

158

|

Chapter 13

Arcs & Circles

To draw an arc by specifying its endpoints and the centerpoint

1

On the Draw menu, click Arc, 2 Points & Center, or click the 2 Points & 
Center Arc button on the All-In-One toolbar.

2

Click the startpoint. A small diamond marks the point.

3

Click a second point. Another small diamond marks the point.

4

Click the centerpoint or press CTRL to click the endpoint.

To draw an arc by specifying its endpoints and included angle

1

On the Draw menu, click Arc, 2 Points & Angle, or click the 2 Points & 
Angle button on the All-In-One toolbar.

2

Enter the included angle on the edit bar and press ENTER.

3

Click the startpoint. A small diamond marks the point and a rubber-band 
arc appears.

4

Click the endpoint.

Summary of Contents for 00308-011408-9F30A - VLA AUTOSKETCH R8-MEDIA W9X/NT

















































































































































































































































































































































































































Reviews:

No comments